Menu

Offer

Master distribution of

General distribution

They write about us

Certificates

Extralink Apollo Managed Fiber Switch

6017.png

Extralink APOLLO is a 8-PORTS managed 1000BaseFX Fiber SFP switch with one additional uplink port RJ-45/1000SFP operating in COMBO mode.

 

6444.PNG

 

Extralink Apollo Managed Fiber Switch is equipped with large number of practical features, for instance:

6445.png

 

Extralink Apollo has some very important advantages:

- Supports SFP modules on a hot-plug

- 100% compatible with other fiber optic switches

- 100% compatible with media converters, and other devices equipped with SFP ports

- Works with various types of SFP modules, such as single-mode, multi-mode and WDM ones


Extralink Apollo is an ideal device for use in networks and systems based on FTTx (e.g. FTTH, FTTB). However, the biggest advantage of using such fiber optic switches is their versatility. In situation where you need to change something in the network, you only need to select appropriate SFP module without replacing the device. It is also important that the maximum distance of a transmission is determined by used SFP type and fiber.

This type of SFP switch is a great option for a variety of security, alarm and electrical systems or information flow.

Extralink Apollo fiber switch can be also used in place where you want to physically isolate the office network from production machines management and monitoring.

6446.png


In the example above, the network was built using the following devices and components.

6447.png

 

Thanks to VLANs, you can physically isolate particular segments of your network very quickly, which nowadays is more and more useful. When you send or receive important configuration data intended for CNC machines or you monitor your company and you want to secure these data from office staff or other people- Extralink Apollo is a perfect solution.

The device is equipped with very clear and intuitive graphical interface, to which you have access through a web browser. This solution allows in a quick and easy way to configure a switch. Of course, the device can also be managed from the level of Telnet and CLI line.

You log in as follows:

  1. Open e.g. Putty terminal, enter the IP address of 192.168.3.31, select- Connection type “Telnet” and click “Open”
  2. Log in as “root” with password “root”, then type “enable” and type password “admin”. Now, you have access to configuration through the CLI

6001.png

 

Noteworthy is also legible and intuitive graphical web interface. After logging in (IP: 192.168.3.31, login: root, pass: admin ) you see a clear panel, by which you can configure settings of the device.

6002.png

All configuration settings are arranged in a very intuitive way and there is no need to delve into more sophisticated ones, because they are visible. The graphical interface is divided into four main sections:

- Device Property

- Port Status

- Function Config

- System Management

Thanks to this division, it is extremely easy to make changes in the configuration. Particular configuration settings are presented below:

General Status

6003.png

In this tab you have access to detailed information about each port on the switch.


Combo Port Status

6004.png

 

Port Config

6005.png

In this tab you have access to all necessary port configuration settings: name, speed, flow control, mac learning. If you wish, you can also disable a specific port.

 

VLAN Config

6006.png

This is probably the most important section- VLAN Config. Here you have access to all settings related to VLANs (802.1Q, QinQ).

IGMP Config

6007.png

Of course you also have access to settings related to multicast (IGMP).

 

Port Mirror

6008.png

Storm Protect

6009.png

 

Switch also protects against, for example classic DoS attack (frames with destination address FF:FF:FF:FF:FF:FF). It also detects loops in the network.

 

Loop Detect

6010.png

 

STP

Switch is equipped with STP. It creates a loop-free topology which connects all the switches with each other. Protection against loops in layer 2 is necessary because of the possibility of Ethernet Flood (lack of TTL) and copies of frames (frames are not numbered).

6011.png

6012.png


In the section-System Management- you can e.g. :

- Change the IP address

- Change the name of a device

- Do configuration backup

- Reboot the device

- Update firmware

- Set the management VLAN

- Set the Access List based on IPv4 addresses

 

IP Address

6013.png

System Information

6014.png


Access List Config

6015.png

System Admin

6016.png

Extralink Apollo has some very important advantages:

- Supports SFP modules on a hot-plug

- 100% compatible with other fiber optic switches

- 100% compatible with media converters, and other devices equipped with SFP ports

- Works with various types of SFP modules, such as single-mode, multi-mode and WDM ones

Extralink Apollo is an ideal device for use in networks and systems based on FTTx (e.g. FTTH,FTTB). However, the biggest advantage of using such fiber optic switches is their versatility. In situation where you need to change something in the network, you only need to select appropriate SFP

Attachments

File name File type File size Download
Extralink APOLLO Managed Fiber Switch + Uplink- eng.pdf pdf 1,18 MB download